Quasi impedance source based high power medium voltage converter for grid integration of distributed energy sources

The next generation of Power Electronics systems would need to be able to work at higher power levels, higher switching frequencies, compact size, and higher ambient temperatures, as well as should have improved energy efficiency than existing Silicon (Si) devices. As a result, new wide bandgap semiconductor technologies must be introduced to address Si's physical limitations. Silicon Carbide (SiC) devices are becoming popular because of their outstanding properties that address all the requirements of the next generation Power Electronics system. On the other hand, the converter topology still plays a major role in deciding the overall system performance. Hence the major objective of this dissertation is to devise new multilevel quasi impedance source (qZS) based converter topologies using SiC devices to achieve a compact, highly efficient, and modular solution for grid integration of Solar PV Energy Source to the utility grid. Other objectives include modification in the PWM methods to address the problem of unequal power-sharing in Solar PV multilevel converters. By using qZS as the front-end power converter several different power converter topologies have been developed and presented in this dissertation. The detailed design, modulation, loss analysis, and control have been developed for multi module cascaded structure. Level-shifted PWM technique is developed at first for two cascaded modules which are similar to the standard Phase opposed disposed Pulse width modulation (PODPWM). However, this control method cannot be directly applied to a higher number of modules. For more than two cascaded modules a unified combined hybrid PWM technique is developed and presented. During normal balanced operation, the power among the modules is unequal. To address the unequal power sharing problem, further modification in the PWM technique is done called the Carrier rotation technique. For providing the isolation between the low voltage PV panels and the high voltage AC grid, a modified Inverter topology, and a new modulation technique is developed. The presented technique, however, is limited to a single module, and more research is needed to implement for cascaded structure. Front-end qZS based single-stage DC-AC-DC converter is developed as an alternative of one of the most popular conventional dual active bridge (DAB) converter. The proposed converter offers reduced component count while maintaining the continuous input current. The detailed operation, modulation technique, simulation, and experimental result are presented to show the superiority of the developed qZS Cascaded Multilevel Converter. The developed power converter has strong commercialization potentia

DC-Transformer Modelling, Analysis and Comparison of the Experimental Investigation of a Non-Inverting and Non-Isolated Nx Multilevel Boost Converter (Nx MBC) for Low to High DC Voltage Applications

This paper mainly focuses on the analysis, DC-transformer modeling, comparison, and experimental investigation of a non-inverting and non-isolated Nx multilevel boost converter (Nx MBC) for low to high DC applications. Recently, numerous isolated and non-isolated DC-DC converter configurations have been addressed for low to high DC voltage conversion purposes, which is vital for several applications (e.g., renewable energy, medical equipment, hybrid vehicles, fuel cells, DC-links, multilevel inverters, and drive applications), by utilizing and modifying the structure of reactive elements (switched capacitors and switched inductor circuitry). Among all the switched reactive structures, voltage multiplier circuitry provides a feasible solution for low to high DC voltage conversion due to its flexible and modular structure, voltage clamping capability, reduced rating of components, and ease of modification. Non-inverting and non-isolated Nx MBC combine the features and structures of conventional boost converters and voltage multiplier circuitry. DC-transformer modeling of Nx MBC is discussed for the continuous current mode (CCM) and discontinuous current mode (DCM), which helps to analyze the characteristics of the converter in a more practical way and helps to study the effect of semiconductor components, internal resistances, and load on the voltage conversion ratio of the converter. The mode of operation of Nx MBC in the CCM and DCM is also discussed with the boundary condition. The derived analysis is verified by simulations and experimental investigations, and the obtained results of 3x MBC always show good agreement with each other and the theoretical analysis

Improved power quality operation of symmetrical and asymmetrical multilevel inverter using invasive weed optimization technique

Low switching frequency pulse width modulation (PWM) technique for modulation and control of multilevel inverter in medium voltage high power applications is preferred in order to reduce the switching losses. In this context, a multilevel inverter operated with Selective harmonics minimization PWM technique offers better quality waveform at reduced switching losses. After the Fourier series analysis, the system of non-linear simultaneous transcendental equations is obtained. These equations are then solved to obtain switching angles to have certain low order harmonics at minimum value and regulation in the fundamental voltage magnitude. In this paper, a novel invasive weed optimization (IWO) technique is proposed to compute switching angles. The proposed technique can compute switching angles for both symmetrical and asymmetrical multilevel inverters. Thus it has superiority over well-known optimization techniques such as GA, PSO, DE, and ACO, etc. Moreover, in certain modulation index ranges, it provides faster convergence and accurate results which have been demonstrated in the paper. The computational results have been verified with the experimental result on the prototype developed in the laboratory. The field programming gate arrays (FPGA) based controller is used to implement the proposed technique. The hardware results have been found in close agreement with the computed results. 2022This publication was made possible by NPRP grant #[ 13S-0108-20008 ] from the Qatar National Research Fund (A member of Qatar Foundation). The statements made herein are solely the responsibility of the authors. The APC of the paper is funded by the Qatar National Library , Doha, Qatar.Scopu

Modelling and indirect field‐oriented control for pole phase modulation induction motor drives

In the recent days, for the traction and electric vehicle (EV) applications, multiphase machines with pole phase modulation (PPM) technique have been proposed. The smoother operation during pole changeovers as well as steady-state operations is a significant constraint while adopting the PPM-based multiphase induction motor (PPMIM) drives for EV and traction applications. So, in this paper, the PPMIM dynamic model and associated vector control are proposed for attaining a smoother operation of the machine. The machine modelling equations and transformation matrices are implemented in an arbitrary reference frame by considering the different pole phase combinations. Based on the modelling equations, the indirect field-oriented control (IFOC) is proposed for PPMIM drives by reflecting the associated changes in parameters for different pole phase modes. In the IFOC, for regulating the d-axis and q-axis current components, single PI control loops have been implemented for all pole-phase combinations. The proposed IFOC scheme is robust and applicable for adopting any type of pulse width modulation. The experimental, as well as simulation results, are given to illustrate the potentiality of the proposed dynamic model and IFOC. The PPMIM machine performance during the steady state as well as pole changeovers in different pole phase modes are analyzed and associated. Simulation and experimental results are presented